Translating...
Home made Cnc router mill Hobbycnc Emc2 first works!
Cnc HobbyCNC Pro Driver Board
working with emc2, Gcode made with Cambam.
First works!
http://www.youtube.com/watch?v=6cd3bG3Oaoo
http://aerocreation.canalblog.com
Duration : 0:9:59
Posted in 
Tags: 8 Responses to “Home made Cnc router mill Hobbycnc Emc2 first works!”
Leave a Reply
I make the Z origin …
I make the Z origin with a sheet of paper. The thickness is around 0.1 mm. I descent step by step (0.1mm) on the paper, the drill is stop. I move the paper with my hand and continue to descent until the paper is lock. Then I consider that the tool is under 0.2mm of the Z origin. So the drill never touch the board, and is always around 0.2 0.3mm of the board. But sometimes the tool touch it! Sorry for my English!
how did you get it …
how did you get it so close to the board underneath without touching it at all? Do you have problems with heat?
The cool …
The cool whee-whee-whee sounds alone are worth building a cnc router.
It’s Emc2, a free …
It’s Emc2, a free software that work only on linux, ubuntu exactly!
What program do you …
What program do you use to control the cnc router?
Hello, the goal of …
Hello, the goal of this machine is to work on big sizes in only tender material, so it is not a very rigid machine! It need 2 screws for the X axis with 2 stepper motors.
the crossbar (Y axis) requires a lot of rigidity
Hi Matthieu, I was …
Hi Matthieu, I was wondering what you thought of this design. It’s looks pretty good to me and am thinking of building something similar. Which areas need the most strength in this sort of design?
très émouvant …
très émouvant …