CNC Plasma Cutter » aluminium http://cncplasmacutterzone.com/blog Great Information on Plasma Cutters Wed, 28 Jul 2010 00:12:06 +0000 http://wordpress.org/?v=2.8.4 en hourly 1 i am going to cut and drill aluminium 10 mm thickness sheet in cnc router machine? http://cncplasmacutterzone.com/blog/cnc-router/i-am-going-to-cut-and-drill-aluminium-10-mm-thickness-sheet-in-cnc-router-machine http://cncplasmacutterzone.com/blog/cnc-router/i-am-going-to-cut-and-drill-aluminium-10-mm-thickness-sheet-in-cnc-router-machine#comments Wed, 16 Jun 2010 23:43:10 +0000 admin http://cncplasmacutterzone.com/blog/cnc-router/i-am-going-to-cut-and-drill-aluminium-10-mm-thickness-sheet-in-cnc-router-machine please help me to get the right feed rate , plunge rate the dwell time and rpm for cutting and drilling the aluminium 10 mm thickness sheet

I would have thought that it was the job of the CNC machine to figure that out.

Tags: aluminium, cnc machine, feed, plunge, rate

]]> http://cncplasmacutterzone.com/blog/cnc-router/i-am-going-to-cut-and-drill-aluminium-10-mm-thickness-sheet-in-cnc-router-machine/feed 1 can cnc router machine cut the aluminium? http://cncplasmacutterzone.com/blog/cnc-router/can-cnc-router-machine-cut-the-aluminium http://cncplasmacutterzone.com/blog/cnc-router/can-cnc-router-machine-cut-the-aluminium#comments Mon, 23 Nov 2009 06:58:03 +0000 admin http://cncplasmacutterzone.com/blog/cnc-router/can-cnc-router-machine-cut-the-aluminium I am going to cut and drill aluminium sheet in CNC Router machine?

When I work as a office and partitioning fixer, we used a hand help router in a home made table jig to rout the baseboards corners which where made from aluminium. You’d need to take it real slow because the bits were easy to break.

Tags: aluminium, aluminium sheet, rout, Router, router machine, sheet

]]> http://cncplasmacutterzone.com/blog/cnc-router/can-cnc-router-machine-cut-the-aluminium/feed 2 My home-made CNC router milling some aluminium http://cncplasmacutterzone.com/blog/cnc-router/my-home-made-cnc-router-milling-some-aluminium http://cncplasmacutterzone.com/blog/cnc-router/my-home-made-cnc-router-milling-some-aluminium#comments Fri, 30 Oct 2009 14:35:14 +0000 admin http://cncplasmacutterzone.com/blog/cnc-router/my-home-made-cnc-router-milling-some-aluminium Here my home-made CNC Router is milling a scale RC helicopter tail rotor hub from a piece of 6082-T6 aluminium.

You can see me spraying spirit on the work piece occasionally for cooling. This works great for aluminium.

Duration : 0:2:7


Tags: aluminium, cnc, helicopter, Mill, rc, Router

]]> http://cncplasmacutterzone.com/blog/cnc-router/my-home-made-cnc-router-milling-some-aluminium/feed 25