Posts Tagged ‘control’
Plasma Cutting Robot from Industrial Robotic Solutions
This video shows a sample of cutting flat plate with a Kuka plasma cutting robot. The plasma cutter used is a Thermal Dynamics Cutmaster 151. We are holding .030 tolerances. Tighter tolerances can be held using a Kuka HA (High Aaccuracy) robot. We are also regulating torch height through the robot. A water bed is available (not shown in video) to capture dust and smoke. Visit http://www.industrialroboticsolutions.com for details or call us toll free at (866)571-1066. We have a full line of welding robots also available.
Duration : 0:1:42
Skardenni Homemade CNC-plasmacutter
skardenni plasmacutting with homemade cnc table
Posted in Homemade CNC Plasma Cutter | 
Tags: cnc, control, DIY, emc2, higth, Homebuilt, homemade, plasma, plasmacutting, thc300, torch | 
No Comments »
CNC to Art Video 10 – Mach 3 G-Code Verify – CNC …
CNC to Art Video Series Video 10:
This is the CNC Video series on how to take an image to a CNC File. This process is one that many CNC Users want to know, but there is not much info on. Here is your chance to get the inside scoop.
For more information, please go to: http://www.cncinformation.com
Before we head out to the shop and begin CNC Plasma Cutting, we will check out our G-Code program in Mach 3. This will give us some confidence when running our CNC Program.
Mach 3 is a great CNC Control Program. It takes our G-Code and converts it into Signal for the CNC Controller. The CNC Controller then sends the signals out to either Servo Motors or Stepper Motors. These motors then move the axis to create motion.
Duration : 0:6:38
cnc plasma cutterTracker CNC Automatic Plasma Torch Height Control System
This video shows the speed and accuracy of Tracker THC, or Automatic Torch Height Control System.
The material is aluminum and it has been broken on the press break many times to create a “washboard” effect. The Tracker plasma table will cut a continuous spiral and the THC system will maintain a consistant torch height over all the peaks and valleys.
Although this is demo is a little extreme, Tracker’s THC system is so easy to use that anyone can accomplish this.
Duration : 0:1:18
CNC Plasma Homebuilt Machine
This is my Homebuilt CNC Plasma that I built a year ago.
I designed it myself after looking at lots of other designs on the ‘Net.
I took several ideas from different machines as well as a lot of my own ideas.
I also did all the electronics and wiring myself.
It cuts over a Water table to keep the parts cool and also to reduce the nasty Plasma dust.
I originally built the machine as a CNC Wood Router, and it worked really well in that configuration but I later decided to convert it to a CNC Plasma machine.
It runs a Hypertherm 1000 Powermax Plasma Cutter and has a THC300 Torch Height Control.
Here it is cutting 1.5mm (16swg) 304 Stainless Steel.
Duration : 0:1:43
Tracker CNC Plasma cutting system 5′x10′
We love our Tracker! I just wanted to post this video so everyone could see how quick and easy it is to use. Our Tracker has made a large profit for us on all of our projects. The machine is very well built and the software is very powerful yet easy to use. Tracker’s customer service has been amongst the best we have seen in the metal fabrication industry!
Duration : 0:3:58
Posted in Tracker CNC Plasma Cutter |
Tags: automated, automation, chopper, cnc, computer, control, fabrication, laser, metal, plamacam, plasma, rod, Torchmate, Tracker, waterjet |
No Comments »
