Translating...
Posts Tagged ‘Dynamics’
Questions about Torchmate, Call (866)571-1066
For our free catalog go to www.torchmate.com to download or have one mailed to you.
Duration : 0:1:27
Tracker CNC Plasma Table Cutting Club Logos from 3/16 mild steel
Watch this video and see how quickly the Tracker Pro Table can turn 3/16″ thick steel into night club logos for a local bar using a Thermal Dynamics 80 amp plasma cutter.
Duration : 0:1:45
Posted in CNC Plasma Cutting Table | 
Tags: cnc, cutting, Dynamics, mild, plasma, steel, Thermal, Tracker | 
No Comments »
Plasma Cutting Robot from Industrial Robotic Solutions
This video shows a sample of cutting flat plate with a Kuka plasma cutting robot. The plasma cutter used is a Thermal Dynamics Cutmaster 151. We are holding .030 tolerances. Tighter tolerances can be held using a Kuka HA (High Aaccuracy) robot. We are also regulating torch height through the robot. A water bed is available (not shown in video) to capture dust and smoke. Visit http://www.industrialroboticsolutions.com for details or call us toll free at (866)571-1066. We have a full line of welding robots also available.
Duration : 0:1:42
More Torchmate Tube and Pipe Cutting Examples
Here is another video showing how our Torchmate Tube & Pipe Cutting Attachment Plasma Cuts shapes into pipe from 1″ to 8″ in diameter.
Duration : 0:0:8
Figure Engineering CNC Plasma Demo
CNC Plasma cutting with a 5′x10′ Torchmate 2 with a Thermal Dynamics Cut Master 81 and a 1-Torch. Table tolerance of .0015″
Duration : 0:1:5
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cut, Cutmaster, Dynamics, Engineering, Fig, Figure, Grilles, Masater, plasma, table, Thermal, Thermaldynamics, Torchmate |
1 Comment »
Torchmate CNC Plasma Cutter
This is a video of our new Torchmate 4 CNC Plasma Cutting Water Table with rapid moves of 2000 inches per minute.
Duration : 0:3:38
Torchmate Plasma Tube & Pipe Cutting Attachment
Here you will see our Torchmate Tube Cutting Attachment cutting some basic shapes out of steel pipe.
Duration : 0:0:22
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube |
No Comments »
Torchmate 4 CNC Plasma Cutter with Water Bed
This is a new Torchmate 4 CNC Plasma Cutting System with Water Bed. It is available with either stepper motors or servo’s. The machine in the video has stepper motors. A CNC Router is available as well. Call for a quote toll free (866)571-1066 or Internationally (775)673-2200.
Duration : 0:1:26
Plasma Cutting square tubing with Kuka robot and Thermal Dynamics Plasma Cutter
This video shows us cutting structural members for one of our Torchmate X CNC Plasma Cutting Tables. We manufacture, sell and use these plasma cutting robotic cells because of their ability to cut complex shapes into tubing that can not be accomplished on our CNC tables. It has the ability to cut any shape required into the tubing on multiple sides. This technology is invaluable to us and can be purchased for your shop relatively inexpensively. Visit http://www.industrialroboticsolutions.com or give us a call toll free at (866)571-1066 for details. We also manufacture and sell a full line of welding robots as well.
Duration : 0:0:56
Torchmate Plasma Tube & Pipe Cutting Attachment
This video shows a 3″ pipe with 120 quarter inch holes cut into it in a uniform pattern around the tube. The system shown uses a Thermal Dynamics True Series Plasma Cutter cutting at 40Amps and 90 inches per minute. We cut the middle part of the video out to save time during download.
Duration : 0:1:14
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube |
4 Comments »
