Translating...
Posts Tagged ‘Home’
cnc plasma taglio
primo taglio con plasma su pantografo cnc fatto in casa
Duration : 0:0:42
Posted in 
Tags: 
CNC Stomp 1 – CNC Project Introduction – Learn CNC Cutting
CNC Project that is shot in a tutorial sequence. It goes from the Design, CAD, CAM, Control, CNC Plasma Cutting and then final assembly. Check out this CNC How-To.
http://www.cncinformation.com
Duration : 0:3:36
Homebrew Plasma Quench
My home-made CNC plasma cutting machine. Water treated with Sodium Nitrite for corrosion inhibitor and n-alkyl dimethyl benzyl ammonium chloride and n-alkyl dimethyl ethylbenzyl ammonium chloride for bacteria/algae inhibitor.
Duration : 0:1:27
CNC Stomp Pad 7 | Part Grinding | CNC Plasma Video Tutorial
When you cut something out with a plasma cutter there is slag left over you have to remove. This slag is officially called “dross” when it come to plasma cutting. In this video we rough grind the cnc stomp pad to remove the dross. I call it rough grind because later we will use a DA Sander to smooth it all out.
http://www.cncinformation.com
Duration : 0:2:19
CNC Stomp Pad 3 – Rhino CAD – Learn CNC Plasma Cutting
In this CNC Tutorial Video we go over the design in CAD. We resize it to our dimensions and then convert it into a DXF File. Finally the DXF File is ready for CAM.
http://www.cncinformation.com
Duration : 0:4:26
CNC Plasma Homebuilt Machine
This is my Homebuilt CNC Plasma that I built a year ago.
I designed it myself after looking at lots of other designs on the ‘Net.
I took several ideas from different machines as well as a lot of my own ideas.
I also did all the electronics and wiring myself.
It cuts over a Water table to keep the parts cool and also to reduce the nasty Plasma dust.
I originally built the machine as a CNC Wood Router, and it worked really well in that configuration but I later decided to convert it to a CNC Plasma machine.
It runs a Hypertherm 1000 Powermax Plasma Cutter and has a THC300 Torch Height Control.
Here it is cutting 1.5mm (16swg) 304 Stainless Steel.
Duration : 0:1:43
CNC Stomp Pad 4 – SheetCam – Learn CNC Plasma Cutting
Here we set the CAM Programming parameters in SheetCam. Next we finalize the G-Code for the project. You also get a quick look at some CNC Post-Processing
http://www.cncinformation.com
Duration : 0:6:29
CNC Stomp Pad 4 – SheetCam – Learn CNC Plasma Cutting
Here we set the CAM Programming parameters in SheetCam. Next we finalize the G-Code for the project. You also get a quick look at some CNC Post-Processing
http://www.cncinformation.com
Duration : 0:6:29
CNC Stomp Pad 6 | CNC Plasma Cutting Video Tutorial | CNC
Last video we checked our g-code to make sure our program was correct. Now we go out to the shop and do some work. We zero out the cnc plasma cutter and start cutting our aluminum stomp pad. Once we are done, we look it over and note the slag or dross we will have to grind off next.
http://www.cncinformation.com
Duration : 0:4:38
CNC Stomp Pad 2 – CNC Design – Learn CNC Plasma Cutting
In this next video we go over the design of the CNC Stomp Pad. We use Adobe Illustrator to sketch it out. We prepare something that a CNC Plasma Cutter could follow.
http://www.cncinformation.com
Duration : 0:5:27
