Posts Tagged ‘Hypertherm’
CNC Plasma Cutting
Hypertherm Hi Definition Plasma cutter combined with a ShopSabre water table. 1/4″ steel @ 100 ipm
Visit us at dsadveng.com
Duration : 0:1:5
Posted in CNC Plasma Cutting Table | 
Tags: Advanced, arc, cnc, DS, Engineering, fabrication, Hypertherm, machine, machining, plasma, shop, steel, table, water | 
No Comments »
CNC Plasma Cutter
Hypertherm powermax 1250 cutting 1\2 steel plate Visit CNCINMOTION.COM for more info and other machines including cnc wood routers,cnc Drum machines
Duration : 0:1:26
Posted in CNC Plasma Cutting Machines |
Tags: 1250, cnc, cutter, Hypertherm, plasma, powermax |
1 Comment »
More Torchmate Tube and Pipe Cutting Examples
Here is another video showing how our Torchmate Tube & Pipe Cutting Attachment Plasma Cuts shapes into pipe from 1″ to 8″ in diameter.
Duration : 0:0:8
Torchmate CNC Plasma Cutter
This is a video of our new Torchmate 4 CNC Plasma Cutting Water Table with rapid moves of 2000 inches per minute.
Duration : 0:3:38
Torchmate Plasma Tube & Pipe Cutting Attachment
Here you will see our Torchmate Tube Cutting Attachment cutting some basic shapes out of steel pipe.
Duration : 0:0:22
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube |
No Comments »
Torchmate 4 CNC Plasma Cutter with Water Bed
This is a new Torchmate 4 CNC Plasma Cutting System with Water Bed. It is available with either stepper motors or servo’s. The machine in the video has stepper motors. A CNC Router is available as well. Call for a quote toll free (866)571-1066 or Internationally (775)673-2200.
Duration : 0:1:26
Roller chain drive Plasma table
My first CNC plasma cutter/profile cutter that can cut up to 3/4″ plate and 7/8″ steel plate with an edge start.
It uses a Hypertherm 1250 with up to 80 amps of cutting performance. These are supposed to be the best in the business and at a price of $5600 it had better be. I got a very good discount off the recommended price here in Australia and I have seen them go for as much as $8000. This is just for the actual plasma cutter machine not the whole table setup.
I am still having a few issues with the torch height controller not following the contour properly but I should get that all sorted out in a few weeks when the weather warms up enough for me to sit outside twiddling the buttons to get it right.
Duration : 0:6:20
Plasma Cutting square tubing with Kuka robot and Thermal Dynamics Plasma Cutter
This video shows us cutting structural members for one of our Torchmate X CNC Plasma Cutting Tables. We manufacture, sell and use these plasma cutting robotic cells because of their ability to cut complex shapes into tubing that can not be accomplished on our CNC tables. It has the ability to cut any shape required into the tubing on multiple sides. This technology is invaluable to us and can be purchased for your shop relatively inexpensively. Visit http://www.industrialroboticsolutions.com or give us a call toll free at (866)571-1066 for details. We also manufacture and sell a full line of welding robots as well.
Duration : 0:0:56
CNC Plasma Homebuilt Machine
This is my Homebuilt CNC Plasma that I built a year ago.
I designed it myself after looking at lots of other designs on the ‘Net.
I took several ideas from different machines as well as a lot of my own ideas.
I also did all the electronics and wiring myself.
It cuts over a Water table to keep the parts cool and also to reduce the nasty Plasma dust.
I originally built the machine as a CNC Wood Router, and it worked really well in that configuration but I later decided to convert it to a CNC Plasma machine.
It runs a Hypertherm 1000 Powermax Plasma Cutter and has a THC300 Torch Height Control.
Here it is cutting 1.5mm (16swg) 304 Stainless Steel.
Duration : 0:1:43
Torchmate Plasma Tube & Pipe Cutting Attachment
This video shows a 3″ pipe with 120 quarter inch holes cut into it in a uniform pattern around the tube. The system shown uses a Thermal Dynamics True Series Plasma Cutter cutting at 40Amps and 90 inches per minute. We cut the middle part of the video out to save time during download.
Duration : 0:1:14
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube |
4 Comments »
