Posts Tagged ‘Learn’
CNC Stomp Pad 4 – SheetCam – Learn CNC Plasma Cutting
Here we set the CAM Programming parameters in SheetCam. Next we finalize the G-Code for the project. You also get a quick look at some CNC Post-Processing
http://www.cncinformation.com
Duration : 0:6:29
Posted in 
Tags: 
CNC Stomp Pad 4 – SheetCam – Learn CNC Plasma Cutting
Here we set the CAM Programming parameters in SheetCam. Next we finalize the G-Code for the project. You also get a quick look at some CNC Post-Processing
http://www.cncinformation.com
Duration : 0:6:29
CNC Stomp Pad 6 | CNC Plasma Cutting Video Tutorial | CNC
Last video we checked our g-code to make sure our program was correct. Now we go out to the shop and do some work. We zero out the cnc plasma cutter and start cutting our aluminum stomp pad. Once we are done, we look it over and note the slag or dross we will have to grind off next.
http://www.cncinformation.com
Duration : 0:4:38
CNC Stomp Pad 2 – CNC Design – Learn CNC Plasma Cutting
In this next video we go over the design of the CNC Stomp Pad. We use Adobe Illustrator to sketch it out. We prepare something that a CNC Plasma Cutter could follow.
http://www.cncinformation.com
Duration : 0:5:27
CNC Stomp Pad 2 – CNC Design – Learn CNC Plasma Cutting
In this next video we go over the design of the CNC Stomp Pad. We use Adobe Illustrator to sketch it out. We prepare something that a CNC Plasma Cutter could follow.
http://www.cncinformation.com
Duration : 0:5:27
CNC Stomp Pad 5 – Mach 3 G-Code – Learn CNC Plasma Cutting
In this video we go through Mach 3 to look over the g-code. We are checking to see if we have any problems before we go to the CNC Plasma Cutter.
http://www.cncinformation.com
Duration : 0:5:45
