Translating...
Posts Tagged ‘mach3’
HOMAG BAZ CNC ROUTER 5-AXIS WOODWOP OFFICE WOOD FURNITURE 04
Alarsis, ALBERTI, ANDI, ART CNC, AXXIOM, AXYZ AUTOMATION, Belotti, BIESSE, Boxford BUSELLATO, BZT, C.R ONSRUD, CAM Tech, CAMaster, CAM-WOOD, CeNeCe, Central CNC, CharlyRobot, CINCINNATI, CMS, CNC Masters, CNC-STEP, CNC-Welschoff, Colinbus Comac, Computerized Cutters Inc, COSMEC, Datron, Denford, DIGITAL TOOL, DMS, DynaCNC, EKSTROM/CARLSON, Emach Limited, EX-Factory, ez-Router, FlexiCAM, G-Code Technology, GlenTek, GMR, GORILLA CNC, HEIAN, HOL-HER, HOMAG, HUELLHORST, IMA, InfoTec, ISEL, JONSDORF, K2 CNC, KITAKO, KOMO, Larken, LASERSPEC, MAGNUM PHEONIX, MAKA, Many CNC, MASTERWOOD, Max computer, Mecanumeric, MORBIDELLI, Motion Tek, MOTIONMASTER, MULTIAX, Multicam, MULTICAM, Next Wave Automation, NORTHWOOD, OMNITECH, Pacer, Pcnc Automation, Pilot Pro CNC, PlasmaRouteCNC, POWERMATIC, PracticalCNC, Precix, Roland, Ronchini s.a.s, SCM, SCMI, SHODA, Shopbot, ShopCAM, Shopsabre, STANDARD, Suregrave, TECHLF, TECHNO ISEL, Teetz, Tekcel, Thermwood, Trend CNC, TRON-CNC, Unimatic, Venture, Vision, WADKIN, WARTHOG, WEEKE
Duration : 0:1:41
Posted in 
Tags: 
Testing homemade cnc plasmacutterK2 CNC router cutting wood – Mach 3 – Bosch router
This is a video of a K2 CNC Router cutting Birch .75 thick. 2.5D 3 Axis cutting using the new VisualMill bridge feature. The software allowed us to no need a vacuum table or special fixtures. .375 Dia Bit was used .40 depth. 2 Finsih passes to prevent pulling the part from it’s bridges. 6 bridges were used.
Duration : 0:3:9
mach3 Converted CNC to Art Video 10 – Mach 3 G-Code Verify – CNC …
CNC to Art Video Series Video 10:
This is the CNC Video series on how to take an image to a CNC File. This process is one that many CNC Users want to know, but there is not much info on. Here is your chance to get the inside scoop.
For more information, please go to: http://www.cncinformation.com
Before we head out to the shop and begin CNC Plasma Cutting, we will check out our G-Code program in Mach 3. This will give us some confidence when running our CNC Program.
Mach 3 is a great CNC Control Program. It takes our G-Code and converts it into Signal for the CNC Controller. The CNC Controller then sends the signals out to either Servo Motors or Stepper Motors. These motors then move the axis to create motion.
Duration : 0:6:38
K2 CNC Router – Mach 3 – Guitar Body – Cutting Guitar
This is a K2 CNC Router cutting a guitar body. A Colombo spindle is used. The project uses roughing and finish passes. The bit cuts a depth of 1.5 inches. This project takes about 13 minutes. This was a test or demo run with little enhancements of the program to make the cutting faster. I am sure a Luthier can make the project cut faster. The KG-3925-GC machine is often used for inlay, body, necks, 3D and 2D cutting also. The machine runs about $15,000, but basic machine starts at about $11,500. A similar machine will be a NAMM 2008.
Duration : 0:2:9
cnc plasma cutterHomebuilt CNC Plasma Cutter and Water Table
Cutting .134″ steel plate at 60 ipm with my homebuilt cnc plasma cutter and water table.
Duration : 0:1:18
Homebuilt 