Posts Tagged ‘miller’
Plasma Cutting Robot from Industrial Robotic Solutions
This video shows a sample of cutting flat plate with a Kuka plasma cutting robot. The plasma cutter used is a Thermal Dynamics Cutmaster 151. We are holding .030 tolerances. Tighter tolerances can be held using a Kuka HA (High Aaccuracy) robot. We are also regulating torch height through the robot. A water bed is available (not shown in video) to capture dust and smoke. Visit http://www.industrialroboticsolutions.com for details or call us toll free at (866)571-1066. We have a full line of welding robots also available.
Duration : 0:1:42
More Torchmate Tube and Pipe Cutting Examples
Here is another video showing how our Torchmate Tube & Pipe Cutting Attachment Plasma Cuts shapes into pipe from 1″ to 8″ in diameter.
Duration : 0:0:8
Torchmate Plasma Tube & Pipe Cutting Attachment
Here you will see our Torchmate Tube Cutting Attachment cutting some basic shapes out of steel pipe.
Duration : 0:0:22
Posted in Torchmate CNC Plasma Cutter | 
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube | 
No Comments »
Torchmate Plasma Tube & Pipe Cutting Attachment
This video shows a 3″ pipe with 120 quarter inch holes cut into it in a uniform pattern around the tube. The system shown uses a Thermal Dynamics True Series Plasma Cutter cutting at 40Amps and 90 inches per minute. We cut the middle part of the video out to save time during download.
Duration : 0:1:14
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube |
4 Comments »
Torchmate Plasma Tube & Pipe Cutting Attachment
This video shows a 3″ pipe with 120 quarter inch holes cut into it in a uniform pattern around the tube. The system shown uses a Thermal Dynamics True Series Plasma Cutter cutting at 40Amps and 90 inches per minute. We cut the middle part of the video out to save time during download.
Duration : 0:1:14
Posted in Torchmate CNC Plasma Cutter |
Tags: cnc, cutter, cutting, Dynamics, esab, gantry, Hypertherm, miller, pipe, plasma, Thermal, Torchmate, tube |
4 Comments »
